Epilepsy Alarm Monitor MP5v2The Medpage Model MP5V2 epileptic seizure movement detector is designed to detect a variety of seizure types from all ages, including tremor, Tonic phase and seizures that cause limb twitching movements. The high performance sensor and control software positively identifies seizure movement from a sleeping infant, ignoring usual sleeping movements. In fact, the MP5V2 sensor can detect a mouse moving across a bed. A verified ongoing seizure results in an alarm transmission to the carer pagers with a working range of 100M (2 supplied).  The sensor (490mm x 290mm x 12mm) has a sensitivity control to allow adjustment for patient body weight and bed/cot mattress type. A permissible movement alarm delay also has a control dial allowing adjustment from 2 – 30 seconds. This setting allows a person to turn over, or reposition themselves without an alarm generated. Settings are digitally stored to prevent tampering or accidental adjustment.For people that vocalise during or preceding a seizure, the monitor has a built in microphone frequency tuned to detect human sounds. Detected sounds result in an alarm transmission to the carer pagers. When you need to trust the safety and performance of a device to guard your pride and joy rest assured, Medpage Limited is accredited by BSI to ISO 13485:2003 and ISO 9001 for the manufacture and distribution of medical devices and our monitors are laboratory tested and certified. Suitability - The following information must be considered before purchasing a seizure monitor. The Medpage MP5V2 is suitable for people aged 1 month and above with a minimum body weight of 9lb (4.08Kg). The monitor sensor is suitable for use on most bed and cot types. The MP5V2 is for the detection of seizures where there is body movement, so only when the patient’s seizures cause movement will they be detected, even if very minute.Epilepsy Alarm Monitor MP5v2